Tree Removal in Denver, CO
Plan tree removal in Denver, Colorado: local authority, public/private responsibilities, access and a confirmed material route.
Estimate your removal budget
What could removing one tree cost?
Planning tree work in Denver? Change the options to get an instant budget reference for one tree.
One medium-height tree · removal reference only.
Local quotes may fall outside this range. Confirm hauling, permits, taxes and restoration separately.
Sources and calculation details
These are national published references, not measured prices for Denver. No city multiplier is applied. Start with the selected height range; if chosen, apply the access allowance, then add the stump allowance. Results are rounded outward to the nearest $25. A “+” means the upper end is open; every range may be exceeded by an actual job.
| Approximate height | Published range |
|---|---|
| Small · under about 30 ft | $200–$500 |
| Medium · about 30–60 ft | $500–$1,500 |
| Large · about 60–80 ft | $850–$2,000 |
| Extra-large · over about 80 ft | $1,200–$2,500+ |
Height and stump references: HomeGuide cost guide (February 4, 2026). Access allowance: Angi cost factors (July 8, 2026). Checked October 22, 2026. Inclusions vary: avoid adding an item again if your written quote already includes it.
Your Denver project
Confirm the property’s jurisdiction, the tree’s responsibility and the scope you want priced. Local procedures and a contractor’s work agreement answer different questions.
Explore the city guide and interactive map ↗Colorado local tree-work decisions
Before arranging tree removal in Denver, resolve the authority for the actual tree and include a workable destination for the wood. Denver's Office of the City Forester publishes tree requirements and a permit route for public-space work.
Establish the local authority and project conditions
For removal, this check decides which recommendation and permission need to be in place before cutting. Denver's Office of the City Forester publishes tree requirements and a permit route for public-space work. A tree in the street right-of-way should be identified with that office before removal is purchased; the adjoining owner's maintenance obligation is not a universal exemption from City review. Explain whether the job affects a parkway, a public tree or a development site. Ask the office to confirm the applicable decision and keep the response with the accepted estimate. Its current contractor list helps check licensing, but a list entry is not a City endorsement or a substitute for verifying the firm's actual qualifications, insurance and project scope. See the source instructions for the stated scope.
Choose an eligible destination before leaving wood
A removal can produce brush, trunk wood and stump material with different receiving requirements. Denver's current waste page makes owners responsible for disposal of stumps and branches over four inches in diameter or four feet in length. It directs smaller qualifying material toward composting and supplies collection-account and licensed-hauler routes. A wood dimension on that page does not mean a whole stump fits a cart or that a commercial removal load is accepted under a household service. Ask Solid Waste Management or the actual receiver about the material, volume and transporter. Have the bidder name transport for oversized wood, stump grindings and any contaminated material. Compare an accepted full-hauling finish with a clearly bounded compost option, rather than assuming an ordinary trash pickup takes every part of a removal. See the source instructions for the stated scope.
Keep routine arrangements distinct from storm response
If damage is the reason for removal, distinguish immediate safety work from the later planned scope. Denver's guidance says an obstructing public-right-of-way tree or part must be addressed and explains that City-arranged obstruction removal can be billed to the owner. That makes public access a distinct recovery responsibility; it is not a promise of free private cleanup. Keep clear of damaged canopy and wires and use emergency or utility routing for immediate danger. Following safety assessment, record what obstruction work was completed and what private branches, logs and standing damage remain. Check current weather-related collection instructions before setout. The City page's routine responsibility language does not authorize an unsafe owner attempt to clear a street or create an expanded incident pickup program. See the source instructions for the stated scope.
Turn the local decision into a complete removal estimate
If the reason for removal remains uncertain, obtain an assessment that explains retention alternatives and any limits to inspection. Once removal is recommended and authorized, give bidders consistent tree labels, access constraints and retained-root protection requirements. Request written inclusions for hauling, stump grinding, grindings, root work and restoration; these are separate outcomes. Verify insurance and applicable credentials and record how changes are authorized. Use the shared calculator only as a national one-tree planning range, then obtain a site-specific quote. An estimate does not grant permission, and a broad cleanup line does not establish that a receiving operator accepts the proposed load.
A Denver work-brief example
For the removal estimate, identify what must leave and what finish remains. For a frontage removal, request the City decision and the same access-protection requirements from every bidder. Separate trunk transport, stump work, grindings and ground repair. An estimate that leaves branches beyond the waste page's size limits cannot be treated as complete simply because the property's ordinary collection bill is paid.
Use the guide for the actual municipality
For a property in Lakewood, use the Lakewood tree removal guide to check that jurisdiction before transferring this plan. Lakewood's Forestry FAQ says all forestry work performed for hire in the city must use a licensed and insured tree contractor. The location of the property determines the applicable procedure; these neighboring guides do not establish shared rules or provider coverage.
Before accepting the scope
- Authority: Denver Office of the City Forester and Solid Waste Management: identify the tree, project and applicable decision.
- Scope: List assessment, pruning or removal separately from hauling and ground work.
- Access: Agree protection for surfaces, retained roots and shared routes.
- Material: Confirm the actual receiver, load category, transporter and collection date.
Questions about this work
Does a removal estimate establish permission?
The estimate describes a purchase. Denver Office of the City Forester and Solid Waste Management must establish the applicable local process for the actual tree and project. Keep approval and any conditions with the accepted scope.
Can I leave all removal material for routine collection?
Use the specific local material category and account eligibility. Denver's current waste page makes owners responsible for disposal of stumps and branches over four inches in diameter or four feet in length. Ask the operator about large wood, stumps, contractor loads and the intended date before accepting an estimate that leaves them.
What does the removal planning calculator establish?
It supplies a national one-tree planning range using stated height, access and stump assumptions. It does not establish a local rate, an approval or a professional assessment. Obtain a written site-specific quote for the actual scope.
Sources and scope
Checked: October 26, 2026. Procedures follow the named municipality. State guidance, county receiving information and operator instructions retain their stated geography and eligibility. Dated documents are identified in the text; confirm current requirements for the actual property and load. Work-brief examples are hypothetical planning aids. No site inspection, individual contractor verification or receiver admission has been completed for your project.